Project 19 – Powder Coated Trailers

Trailers have many uses but in the consumer market they are commonly used to transport water crafts. Unfortunately, trailers are often neglected and poorly maintained. After a day in the water, the water craft is typically carefully rinsed and wiped down. However, the trailer that was exposed to the same corrosive water is not washed down. Repeated exposure to salt water, rain, sleet, snow and sun eats away at the finish and eventually rust corrodes the structural integrity of the trailer frame. It is important to maintain your trailer like your car and boat. So consider Powder Coating when refinishing your trailer.

(read more)

Project 18 – Powder Coating a Wood Grain Finish

There's no reason a wood structure can't last virtually forever – or, at least hundreds of years – far longer than we may actually need the building. With a good understanding of how to protect wood from decay and fire, we can expect today's wood buildings to be around for as long as we wish, that is if the wood is not really wood. Today, we can powder coat many aluminum and steel structures to look just like wood. The only difference of course is bugs and wood rot are no longer an issue. Check out this sample. And this style of powder coating is AAMA 2605 approved, something for the architects to think about.

(read more)

Project 17 – Powder Coating Retail

I have noticed more and more that retail stores are promoting powder coating for their products. For example, I was just surfing CB2, a website dedicated to new trends for outdoor furniture, decor, dining, and more, and came across: skinny genes. Hardworking console table is welded heavy-duty but looks light on its feet. Industrial steel with clear protective powder coat.

Or as on Vieso – a better way to shop for modern furniture – where you can find a Clovelly – Dining Set,

– Chair seat height is 17″
- Table height is 30″
- 100% maintenance free powder-coated aluminum table frame
- Durable HPCL table top
- Stainless steel stackable dining chairs

Indoor style meets outdoor durability as 'Clovelly' seamlessly blurs the lines between a fashion that was once impossible in outdoor furniture. But powder (read more)

Project 16 – Powder Coating Metal Furniture and Home Decor

Sundial Powder Coatings has long been the "person behind the person behind the person". In the beginning, we did not possess a single brick in our operations of creativity. But as the years have progressed we have been exposed to a lot and somewhere along the way we learned something. Today Sundial stands shoulder to shoulder with many of Los Angeles' best powder coaters and designers. After participating in shows on HGTV and the build out of top restaurants in Los Angeles and Pasadena, we look forward to the next powder coating project and offering our powder coating consulting advice.

(read more)

Project 15 – Powder Coating Rims

Like jewelry worn to complement a suit or cocktail dress, car rims are a vital accessory that complements the look, feel and attitude of an automobile or truck. Starting with the hubcap that began appearing with regularity on vehicles in the 1920s, dressing a wheel with chrome or paint determines the personality of the vehicle.

I was very surprised that I had not already blogged about Car Rims. I actually double checked the list twice in disbelief. Each week I think about what to blog next, while day after day customers are bringing in car rims to customize their rides. How does that old saying go... it was in front of me the entire time?

Well no longer will the most popular consumer powder coated item (at least in my shop) go unnoticed. As the Michelin Man says "There is a lot riding on your tires". At Sundial Powder Coatings we understand that fully. To simply read more)

Project 14 – Powder Coating Bicycle Frames

Did you know the bicycle is the primary transportation vehicle used by the human race. About 1.6 billion bicycles are in use throughout the world – in cosmopolitan cities, along remote country lanes, and in the smallest villages – and hundreds of millions of bikes are manufactured every year to meet the continuing demand for cheap wheeled transport.

Yet the bicycle is hardly a new vision of how humans can move. Historians speculate about Leonardo da Vinci's 1490s drawings and a 1580s stained glass window in England that appears to depict a two-wheeler. The first widely recognized two-wheeler in actual use, however, was the pedal-less Celerifere, a toy of the French nobility in the 1790s. The more famous Draisienne followed that toy in 1816, still without pedals. The front wheel could be steered, and this two-wheeler was eventually mass-produced in Europe, particularly in (read more)