Aluminum Extrusion Powder Coating

Sundial Powder Coatings owns a state-of-the-art non-chromate, 7-stage in-line water pre-treatment system that makes us unique. Because of our advanced water treatment process, Sundial differentiates itself from all powder coating companies in southern California. We are able to accommodate the larger product lengths so typical of aluminum extrusions. Our investment in the very latest pre-treatment technology and powder coating equipment has a profound impact on the total overall quality of the finished product that Sundial provides its customers because we are able to realize greater chemical efficiencies, immense cross-contamination reductions and incomparable pre-coating surface preparations. All told, our processes enable us to produce the highest levels of powder coating quality possible anywhere in southern California.

 

Some of the aluminum extrusion products that Sundial accommodates are:

Aluminum Extrusion Powder Coating by Sundial Powder Coating
  • Aerospace Products
  • Air Ducts
  • Architectural Framing and Trims
  • Automotive Products
  • Conveyor Rails
  • Exercise Equipment
  • Fencing
  • Lawn Equipment
  • Office Furniture
  • Heat Sinks
  • Furniture Tube,
  • Electric and Dustless Chamber Tubes
  • Curtain Rails
  • Vending Machines
  • Thermal Windows
  • Solar Collectors
  • Rails
  • Roadway Barriers
  • Hinges
  • Drill Housings and much more.

The number of aluminum extrusion products to which we can successfully apply our powder coating technology is countless.

What Makes Aluminum So Attractive to Use?

  • The actual process of extruding aluminum results in an incredibly strong product or product piece that is relatively low in weight.
  • The weight of aluminum is approximately one-third that of steel, copper and brass.
  • It is also considerably cheaper to purchase.
  • Although aluminum possesses corrosion-resistance properties due to the oxide film that naturally protects it, it still requires additional protection for endurance through the years, especially in hostile environments. And this is where Sundial Powder Coatings enters because we strengthen the aluminums' protective barrier with advanced powder coating technology.
  • Aluminum is an excellent conductor of heat, almost equal to copper, silver, or gold.
  • Aluminum is an excellent excellent reflector of heat and is often used as a heat shield.


How Great Is Powder Coating?
Listen to our Customers

" My wife and I bought a new aluminum patio furniture set 4 years ago. After 2 years, it had faded, been bleached, scratched by falling branches and there were rust pockets all over it. Sundial picked it up from my home, sandblasted it and then powder coated it. They were able to match the exact manufacturer's color. Here we are entering our 3rd year with our powder coated patio furniture set from Sundial and there is not a piece of rust, corrosion, or scratch to be found. The color has not faded from its original sheen either and that's saying something since we leave the furniture in the hot Los Angeles sun year round."
- John S., Los Angeles, CA

" I bought a set of patio chairs and an outdoor table last year for $2,500 from a well-known outdoor furniture store. After only a few months in the sun, the entire set had faded badly. I was embarrased keeping it in my backyard so wanted to throw it away and buy another. A friend of mine told me about powder coating (I had never heard of powder coating before) and then said that Shivie at Sundial in LA was the best at it and could offer the best deal. Sundial picked up my chairs and tables and had them back to me in a week. They looked gorgeous and shiny, just like when I bought them new. I spent $500 to get them powder coated and I'm told that it will continue to look like new for years and years to come. Thanks, Shivie. You not only saved me $2,500 but I would've spent another $2,500 on new patio furniture. I'll give $500 to get back $5,000 any day."
- Joanna B., Beverly Hills, CA

"Our beloved smoker has received a new lease on life thanks to Sundial’s powder coating process! We spent $300 on powder coating and saved a bundle. Not only does the finish last for years but the replacement cost for our smoker was astronomical. We basically bought a new $5,000 smoker for $300 (price of powder coating). Powder coating with Shivie at Sundial is a no-brainer. You're the best. Thanks again."
- Fred P., Sherman Oaks, CA

"Don't buy new car rims or motorcycle rims! Restore them at a tenth of the cost with powder coating!"
- Jonathan D., San Diego, CA